Installation Guide

Step 22
Repeat the procedure
for the next door glide
along, and secure it
to two holes in the
top right of the door.
Gently push the left protruding edge of the
door in behind the left door jamb, as shown
in Diagram 30.
Repeat the procedure (i to iii) for the
right side door.
(i)
(ii)
(iii)
(iv)
Diagram 30
LEFT DOOR
JAMB
GENTLY
PUSH DOOR
IN BEHIND
DOOR JAMB
Start by fitting LEFT side door:
IMPORTANT:
Work from the outside of
the shed with the front face
of the door facing you and
the door handle at the right side.
Taking the left door panel, tilt the
top edge into the shed and
under the door glides, as shown
in Diagram 28.
Then slot the bottom of the door
into the groove in the entry/exit ramp
as shown in Diagram 28A.
FITTING SLIDING DOORS
DOOR
GLIDE
TOP EDGE
OF DOOR
TILTED
INTO
SHED
LEFT DOOR
JAMB
Diagram 28
This step uses pre-assembled components.
Step 21
SLOT
DOOR
INTO
GROOVE
IN
ENTRY/
EXIT
RAMP
DOORDOOR
GROOVE
IN ENTRY/
EXIT
RAMP
Diagram 28A
Diagram 29
FAR
LEFT
DOOR
GLIDE
NEXT
DOOR
GLIDE
ALONG
NUTS AND BOLTS
IN CENTRE HOLES
LEFT EDGE
OF
LEFT SIDE
DOOR
RIGHT
EDGE
OF
LEFT SIDE
DOOR
LEFT DOOR
JAMB
Attach the top of the door to the FAR LEFT door glide by
securing with one nut and bolt in each of the
CENTRE holes of the door glide
and through the holes at the
top LEFT of the door,
as shown in
Diagram 29.
23
E N G L I S H
© Globel Industries Pty Ltd
GI00045 September 30 2015