Installation Guide

Step 1
Fix two side base rails to the front base rail using two screws at each end.
Step 2
Attach corner braces to
each end of the back
base rail, and secure to
side base rails as shown
in Diagram 1A.
Note: Familiarise yourself with the profile of each base rail.
IMPORTANT: The small holes on the vertical (side) faces of each base rail MUST face outwards.
Refer to Diagram 1
HINT:
Make sure the frame is square
by measuring from corner to
corner with a tape measure.
RIGHT
SIDE BASE RAIL
FRONT
BASE RAIL
BACK
BASE RAIL
Diagram 1
4
2
1
IMPORTANT:
Small holes on ALL base rails
MUST face outwards.
BACK
FRONT
LEFT
SIDE
BASE RAIL
Diagram 1A
CORNER
BRACE
BACK
BACK
BASE RAIL
Garden Shed Construction
11
LEFT
SIDE BASE RAIL
3
E N G L I S H
© Globel Industries Pty Ltd
GI00045 September 30 2015