Installation Guide

NOTE: Assemble doors on a clean flat surface.
(iii)
(i)
(ii)
Attach door braces as shown in Diagram 4, by sliding the underside of the brace under the
door edge, so the underside of the front face of the door brace is seated onto the front face
of the door panel. Secure using nuts and bolts ONLY IN HOLES AS SHOWN.
IMPORTANT: Ensure elongated holes in
braces match elongated holes in doors.
Attach two door spacers to the bottom of
each door as shown below.
Attach one door handle to
each door as shown.
Pre-Assembly
SLIDING DOORS
BOTTOM OF DOORS
TOP OF DOORS
TOP OF DOOR
DOOR
BRACE
DOOR BRACE
DOOR
DOOR
Diagram 4
DOOR
SPACER
DOOR
SPACER
DOOR
HANDLES
NOTE:
Doors for 6' wide sheds
are shown here.
Doors for 8' wide sheds
have two extra holes per door
along top and bottom edges.
Doors for 5' wide sheds
have only 5 holes along top edge
and 5 holes along bottom edge.
DOOR BRACE
FIXED IN POSITION
UNDERSIDE
OF FRONT
FACE OF
DOOR BRACE
SEATED ON
FRONT FACE
OF DOOR
PANEL
FRONT FACE
OF DOOR
PANEL
FRONT
FACE
OF
DOOR
PANEL
10
E N G L I S H
© Globel Industries Pty Ltd
GI00045 September 30 2015