Installation Guide

Diagram 2
Diagram 3
LOWER
WALL SHEET
SECTION
WINDOW
WITH GRILL
FACING
OUTSIDE
GROOVE
AT BOTTOM
GARDEN SHED
FITTING WINDOWS
© Globel Industries Pty Ltd
GI00055 July 15 2015
Widths of Windows:
Small Window = width of 1 Wall Sheet
Large Window = width of 2 Wall Sheets (side by side)
Choose the position for the window.
Fit the lower wall sheet section to the shed.
NOTE: Lower wall sheet MUST underlap both
attached wall sheets on either side. To make this easier,
loosen off the screws at the bottom and middle of
both attached wall sheets at either side.
Secure with screws. See Diagram 1.
NOTE:
For the purpose of this assembly, the diagrams
demonstrate the installation of a small window.
With the grill facing the OUTSIDE of the shed, slide the
window down between the two attached wall sheets, and
fit the groove at the bottom of the window over the top edge
of the lower wall sheet section.
See Diagram 2.
Fit the upper wall sheet section to the top of the window,
and into the groove at the top of the window.
Secure using screws.
See Diagram 3.
underlapping both attached wall sheets on either side
To make
underlapping easier, loosen off the screws at the bottom
and middle of both attached wall sheets at either side.
Step 1
Step 2
Step 3
Diagram 1
1 WALL SHEET 2 WALL SHEETS
ATTACHED
WALL SHEET
ATTACHED
WALL SHEET
LOWER
WALL SHEET
SECTION
UPPER
WALL SHEET
SECTION
SLOTS INTO GROOVE
AT TOP OF WINDOW
INSTRUCTIONS