Installation Guide

Additional Notes

SLIDING DOORS:

SUGGESTION - Lubrication of Doors:

REPLACEMENT OF DOOR GLIDES:

SECURING & SEALING SHED BASE RAILS:

Spraying a silicone spray into the slot under the

top rail and along the front face of the internal front

mid-wall brace, will assist in a smoother and quieter

operation of sliding doors.

Remove nuts and bolts from door glide(s) to be removed,

and slide in direction away from handle side

of door. Door glide will drop out from far end

of slot under top rail.

Replace door glide by inserting into slot

under top rail, slide into position and

secure with nuts and bolts. See diagram shown.

Refer to Pre-Assembly Section "Door Glides" (page 10)

and Steps 27 - 29 for full details on fitting door glides

and adjustment of doors.

We recommend the following procedure for

securing and sealing shed base rails

to concrete floor:

SECURE -

Secure shed base rails to concrete floor

using dyna-bolts as shown in diagram.

SEAL -

Ensure floor is free of dust and debris

and apply silicone on inside of shed,

along the edge of the base rail

and to the floor.

Dyna Bolt

6.5mm x 36mm

SILICONE

DOOR GLIDE.

NOTE:

CURVED SIDE

FACING FRONT FACE

OF GABLE ASSEMBLY

SLOT

SLIDE

BOLT & NUT

TOP RAIL

GI00034 November 1 2014

E N G L I S H