Installation Guide

Attach full wall sheets to the back of shed,
starting at the RIGHT BACK corner panel
and overlapping each sheet.
Secure them to the back top, middle and
bottom rails/brace, using screws as shown
in Diagram 11A.,
See Diagram 12C
Step 11C
WALL SHEETS - BACK
FRONT
FULL
WALL SHEETS
BACK
RIGHT
BACK
CORNER
PANEL
Diagram 12C
ALL SCREWS
FITTED IN
SEQUENCE SHOWN
IN DIAGRAM 11A
Step 11B
Attach full wall sheets and half wall
sheets (depending on the DEPTH of
your shed - Refer Diagram 12 for
wall sheet configurations) to the left
side of the shed, starting at the
LEFT BACK corner panel and
overlapping each sheet.
Secure them to the side top,
middle and bottom rails/brace,
using screws as shown in
Diagram 11A.
See Diagram 12B.
WALL SHEETS - LEFT SIDE
Diagram 12B
FRONT
BACK
LEFT BACK
CORNER
PANEL
LEFT FRONT
CORNER
PANEL
WALL
SHEETS
ALL SCREWS
FITTED IN
SEQUENCE SHOWN
IN DIAGRAM 11A
IMPORTANT:
Refer to Step 11A and Diagram 12A
for fitting the last wall sheet at the left
side to the LEFT FRONT CORNER PANEL.
22
© Globel Industries Pty Ltd
GI00034 November 1 2014
E N G L I S H