Installation Guide

Loosen off (but do not remove) the three screws along

the side edge of the RIGHT FRONT corner panel.

Then, by slightly prising the back edge of the corner panel

away from the frame with your hand, slide the front edge

of the wall sheet in behind.

See diagram 12A.

Re-tighten the three screws in the corner panel

and secure the full wall sheet, using screws,

in the numerical order shown in

Diagram 11A.

NOTE: For aesthetics, we recommend the last sheet at the

right side (towards the front) underlaps the right front

corner panel. This 'underlapping' creates the appearance

of the shed wall being one continuous sheet.

Fitting last sheet at right side to right front corner panel.

Step 11A

Diagram 12A

BACK

RIGHT FRONT CORNER

PRISE UP

CORNER

PANEL AWAY

FROM FRAME

FRONT EDGE

OF LAST FULL

WALL SHEET

RIGHT

FRONT

CORNER

PANEL

LOOSEN OFF

SIDE SCREWS

FRONT

RIGHT FRONT CORNER

FRONT EDGE OF

LAST FULL

WALL SHEET

SLIDES IN BEHIND

CORNER PANEL

RIGHT FRONT

CORNER

PANEL

GI00034 November 1 2014

E N G L I S H