Installation Guide

Step 9
Step 9A
Attach the back mid-wall brace
to the inside of the BACK
corner panels, at the
centre hole position, using
two screws at each end.
See Diagram 8.
IMPORTANT:
Holes at each end of the
back mid-wall brace
MUST face upward.
Secure the back and LEFT
side mid-wall braces together
using a corner brace and
four screws as shown in
Diagram 8A.
Repeat for right side.
Diagram 8
BACK
MID-WALL
BRACE
BACK
FRONT
HOLES AT
EACH END
MUST FACE
UPWARD
LEFT SIDE
MID-WALL BRACE
INSIDE VIEW
OF LEFT BACK
CORNER PANEL
BACK
MID-WALL
BRACE
CORNER
BRACE
BACK
Diagram 8A
17
© Globel Industries Pty Ltd
GI00034 November 1 2014
E N G L I S H