Installation Guide

Step 8
Step 7
Attach the BACK gable assembly -
THE ONE WITHOUT DOOR GLIDES INSERTED,
to the top-wall rail brackets, by slotting brackets
into the end of the gable assembly,
as shown in Diagram 6.
Attach and secure the remaining (front) gable assembly -
WITH DOOR GLIDES INSERTED,
to the top-wall rail brackets at front,
as shown in Diagram 7.
THE ONE
HINT:
Push the corner panels out slightly,
to allow each end of the brackets
to be inserted.
Secure using one screw at each
end of the top rail, and secure
top of both corner panels
to back gable assembly
using 2 screws per panel,
as shown in diagram 6.
Diagram 7
GABLE
ASSEMBLY
AT FRONT
BACK
DOOR GLIDES
FACING
FRONT
FRONT
This step uses a pre-assembled component.
This step uses a pre-assembled component.
16
Diagram 6
GABLE
ASSEMBLY
WITHOUT
DOOR GLIDES
LEFT
TOP-WALL RAIL
BRACKET
TOP-WALL RAIL
BRACKET
PUSH
SIDE WALL
SHEET
OUT
GABLE
ASSEMBLY
TOP
RAIL
TOP
RAIL
FLANGE
FACING
INWARDS
BACK
CORNER
PANEL
© Globel Industries Pty Ltd
GI00034 November 1 2014
E N G L I S H