Installation Guide

Attach and secure both
top-wall rail assemblies
to the inside of the
corner panels as
shown, using one
screw at each end
of rail.
See Diagram 5.
NOTE:
Brackets MUST face
inside of shed.
This step uses pre-assembled components.
Step 5
Repeat steps 3 and 4 for the
two corner panels and mid-wall brace
at the LEFT side. See Diagram 4.
IMPORTANT:
Ensure the wider faces
of the corner panels are
facing front and back.
MID-WALL
BRACE
Diagram 4
4
1
2
3
BACK
FRONT
7
8
CORNER PANELS
AT LEFT SIDE,
WITH WIDER FACES
AT FRONT & BACK
Step 6
HOLES ALONG THIN FACE
MUST FACE UPWARD
TOP-WALL
RAIL
CORNER
PANEL
(LEFT SIDE)
Diagram 5
FRONT
SIDE
TOP-WALL
RAIL
ASSEMBLY
SIDE
TOP-WALL
RAIL
ASSEMBLY
CORNER
PANEL
(RIGHT SIDE)
IMPORTANT:
Holes along the
thin face of the
top-wall rail MUST
face upward.
5
6
15
© Globel Industries Pty Ltd
GI00034 November 1 2014
E N G L I S H