Installation Guide

Step 1
Then fix the two side base rails to the front base rail using two screws at each end.
Step 2
Attach one corner brace to
each end of the
back base rail, and
using four screws in each
corner brace, secure to
back base rail and
side base rails as shown
in Diagram 1A.
Note: Familiarise yourself with the profile of each base rail.
IMPORTANT: The small holes on the vertical (side) faces of each base rail MUST face outwards.
Refer to Diagram 1
HINT:
Make sure the frame is square
by measuring from corner to
corner with a tape measure.
Position each base rail as shown, and assemble in the following order:
- Front base rail (in the position you want your shed to face),
- Back base rail, - Left side base rail, - Right side base rail.
42 3
1
LEFT
SIDE BASE RAIL
RIGHT
SIDE BASE RAIL
FRONT
BASE RAIL
BACK
BASE RAIL
Diagram 1
4
2
3
1
IMPORTANT:
Small holes on ALL base rails
MUST face outwards.
BACK
FRONT
LEFT
SIDE
BASE RAIL
Diagram 1A
CORNER
BRACE
BACK
BACK
BASE RAIL
Garden Shed Construction
13
© Globel Industries Pty Ltd
GI00034 November 1 2014
E N G L I S H