Manualshelf

Food Warming Lamp Owner's Manual

ManualsBrandsGlobe ManualsCommercial EquipmentChefmate Countertop Food Warming Lamp with 500W Dome Lamps and Two Bulbs, and 5 Adjustable Height Levels in Brushed Aluminum Finish
12345678
Page 6
1. Remove all components of warming lamp for quick assembly.
2. Place warming lamp base on a at surface; add the extension bar to the to the top of the
base; align the extension bar holes towards the back for easy adjusting later.
3. Next, place the domed lights onto the beveled part of the extension pole.
NOTE: Domed lights face the same direction as the base feet.
4. Use bolts provided to secure warming lamp/lamp height in the back of the extension pole.
5. Remove light bulbs from packaging and carefuly screw a light bulb into each socket.
6. Place warming lamp on a level surface away from water and at least 8'' away from wall or
other objects.
7. With the power On/Off switch in the “Off” position, plug in warming lamp.
1. Make sure warming lamp is not placed under countertop or overhead cabinet while in use as this can result in a
re.
2. Make sure nothing is on or touching warming lamp and all packing materials have been removed and discarded.
3. Turn the unit on by pressing the On/Off switch “On”. Warming lamp will illuminate heating bulbs.
NOTE: Warming lamp will NOT cook food. It is intended to keep already cooked food warm for serving.
• NEVER move the warming lamp while in use.
• DO NOT store warming lamp in a cabinet while warming lamp is plugged in.
Store warming lamp on countertop or in a designated area away from water.
• NEVER place warming lamp in sink or dishwasher.
• DO NOT hose down or pressure wash any part of warming lamp.
• NEVER wipe warming lamp or its bulbs while plugged in and/or turned on.
• NE placez jamais le réchauffement lampe dans le lavabo ou lave-vaisselle.
• NE PAS le exible vers le bas ou laver sous pression toute partie de réchauffement lampe.
• ESSUYEZ jamais réchauffement lampe ou ses ampoules tandis que branché et/ou activé.
1. If warming lamp is on: power off warming lamp and let cool for at least 15 minutes. Unplug warming lamp from
the outlet and gently wipe down warming lamp stand and bulb holders with a clean, dry or slightly damp soft cloth.
2. Let unit dry completely before resuming normal use.
Assembly & Installation
Cleaning
Operating Instructions
Storage Instructions