SP8 Owner's Manual
Page 6
Installation
UNPACKING
Unpack the mixer immediately after receipt. If the machine is found to be damaged, save the packaging material
and contact the carrier within fteen (15) days of delivery. Immediately contact your source of the equipment.
You have no recourse of damage after fteen (15) days of receipt.
TO AVOID SERIOUS PERSONAL INJURY:
• ALWAYS install equipment in work area with adequate lighting and space.
• ONLY operate on a solid, level, nonskid surface that is nonammable.
• NEVER bypass, alter, or modify this equipment from its original condition. Doing so can create hazards and will
void warranty.
• NEVER operate mixer without all warning labels attached.
INSTALLATION
1. Read this manual thoroughly before installation and operation. DO NOT proceed with installation
and operation if you have questions or do not understand anything in this manual. Contact your local
representative or Globe rst.
2. Remove mixer from the box.
3. Select a location for mixer that has a level, solid, nonskid surface that is nonammable and is in a well-lighted
work area away from children and visitors.
4. Inspect mixer to make sure all parts have been provided (i.e., bowl, beater, whip, and hook).
PROPER GROUNDING
THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THE OUTLET TO WHICH THIS
PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE RECEPTACLE IS NOT THE PROPER
GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT UNDER ANY CIRCUMSTANCES CUT OR
REMOVE THE THIRD GROUND PRONG FROM THE POWER CORD OR USE ANY ADAPTER PLUG (Fig. 6-1
and Fig. 6-2).
5. Complete the warranty registration online at www.globefoodequip.com/support/warranty-registration-form
6. Clean mixer before use. Refer to Cleaning Instructions on page 10. NOTE: It is normal for the factory to
apply a generous amount of grease in and on the machine before initial use. Excess high pressured grease
(brownish-black) can also be found on planetary shaft and some drippings can be found in bowl.
Fig. 6-1 Correct Fig. 6-2 Incorrect