Gas Griddle Owner's Manual (Manual and Thermostatically Controlled)

ManualsBrandsGlobe ManualsCommercial Cooking Equipment36 Inch Commercial Griddle

Serial #:

Instruction Manual for the

Globe Gas Countertop Griddle

Models:

Manually Controlled: GG15G, GG24G, GG36G, GG48G

Thermostatically Controlled: GG24TG, GG36TG, GG48TG

GG36TG

For Service on Your Gas Griddle:

1. Visit our website at www.globefoodequip.com

2. Or call the Globe Service Department at 937-299-8625 and ask for contact

information for your local service company.

Visit our website for information on additional products available from Globe.

www.globefoodequip.com

Slicers, Mixers, Countertop Cooking Equipment, Meat Choppers & Scales

This manual contains important safety instructions which

must be strictly followed when using this equipment.

- IMPORTANT SAFETY NOTICE -

WARRANTY REGISTRATION

SCAN THE QR CODE WITH YOUR MOBILE DEVICE OR GO TO

WWW.GLOBEFOODEQUIP.COM

TO FILL OUT AND SUBMIT YOUR WARRANTY REGISTRATION.

www.globefoodequip.com/support/warranty-registration-form

Summary of content (12 pages)

PAGE 1
Serial #: GG36TG Instruction Manual for the Globe Gas Countertop Griddle Models: Manually Controlled: GG15G, GG24G, GG36G, GG48G Thermostatically Controlled: GG24TG, GG36TG, GG48TG For Service on Your Gas Griddle: 1. Visit our website at www.globefoodequip.com 2. Or call the Globe Service Department at 937-299-8625 and ask for contact information for your local service company. Visit our website for information on additional products available from Globe. www.globefoodequip.
PAGE 2
Index ATTENTION OWNERS AND OPERATORS................................................................................................................3 UNPACKING & INSTALLATION .............................................................................................................................. 4-5 WARNINGS & SAFEGUARDS FOR OPERATION .....................................................................................................6 OPERATING INSTRUCTIONS.............................................
PAGE 3
Attention Owners and Operators Globe’s equipment is designed to provide safe and productive processing, cooking and warming of food products as long as the equipment is used in accordance with the instructions in this manual and is properly maintained. Unless the operator is adequately trained and supervised, there is a possibility of serious injury.
PAGE 4
Unpacking & Installation TO AVOID SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE: • ALWAYS install equipment in a work area with adequate light and space. • ONLY operate on a solid, level, nonskid surface that is nonflammable and away from sinks and water hazards. • NEVER bypass, alter or modify this equipment in any way from its original condition. Doing so may create hazards and will void the warranty. GAS and GAS PRESSURE This unit is factory supplied in Natural Gas.
PAGE 5
Unpacking & Installation INSTALLATION 1. Read this manual thoroughly before installation and operation. DO NOT proceed with installation and operation if you have any questions or do not understand anything in this manual. Contact your local representative or Globe first. 2. Select a location for the Griddle that has a level, solid, nonskid surface that is nonflammable and away from water hazards or sinks, and is in a well-lit work area away from children and visitors. 3.
PAGE 6
Warnings and Safeguards for Operation TO AVOID SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE: For your safety, do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliances. Keep the area free and clear of combustibles. Improper installation, adjustment, alteration, service or maintenance of this equipment can cause property damage, personal injury, or death and voids the warranty.
PAGE 7
Operating Instructions Operating the Griddle - Pilot Lighting Instructions for MANUALLY CONTROLLED Griddles Before operating the Griddle, it should be checked to see that it is sitting level. Adjust the feet to level the Griddle. Be sure the catch tray has been properly placed. The pilot light on the appliance have been set at the factory. Each burner has a pilot light. 1. Make sure all knobs are in the “OFF” position. 2.
PAGE 8
Operating Instructions Igniting the Burner To ignite the burner, turn knob to the “ON” position. Then back off to the desired flame level. The range of adjustment is virtually infinite between “ON” and “OFF”. The space between the legs at the bottom admits combustion air. DO NOT BLOCK THIS SPACE. All burners are lit from constantly burning pilots. Turning the valve to the desired flame height is all that is required to put the unit in service. Do not permit fans to blow directly at the unit.
PAGE 9
Cleaning Instructions • DO NOT use any abrasive or flammable cleaning fluids. • DO NOT hose down, immerse or pressure wash any part of the Griddle, excluding the catch tray. • NEVER use a scrubber pad (on exterior surfaces, except the griddle plate), steel wool or abrasive material, or cleaners containing chlorine, iodine and ammonia or bromine chemicals, as these will deteriorate the stainless steel and shorten the life of the unit.
PAGE 10
Cleaning Instructions RECOMMENDED CLEANING (CONTINUED) PART Catch Tray REQUIRED ACTION Once the unit has cooled, remove the catch tray and discard food waste, per Use or grease/debris and crumbs. at least Daily CAUTION: If the catch tray is permitted to fill too high, grease/debris is likely to accumulate under the unit. The catch tray/drawer is removed by pulling forward.
PAGE 11
Troubleshooting ISSUE Griddle not lighting CAUSE SOLUTION Main gas line is closed Open valve Pilot light is not lit Ignite pilot light Cause unknown Call for service Flame is too high or too low Adjustment knob is turned up or down Adjust flame with control knob Pilot light not staying lit Flame is too low Adjust pilot light flame height Pilot tube clogged Replace pilot tube. Call for service Main gas line leak Turn off main gas valve.
PAGE 12
Limited Warranty Globe Food Equipment Company (“GFE”) warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for a period of 2 year. The labor warranty is two year from original installation or 18 months from actual factory shipment date whichever date occurs first.