C10, C12 NEW C Series Chefmate Slicer Manual (NSF 2010 Cert)

Page 9
DO NOT hold the food product with your hand. Never put you hand on or around food chute when
slicer is on. The food chute handle is the only part of the slicer you should touch while slicing.
5. Use the food chute handle to manually push the food chute back and forth. The food chute handle is the only
part of the slicer you should touch while slicing. Do not catch slices with your hand. Let slices drop onto the
receiving area.
If a product needs to be adjusted during slicing, ALWAYS pull the food chute all the way towards
you. Turn off slicer, and close slicer table prior to adjusting the product and the end weight.
6. After the last slice stroke, pull the food chute all the way towards you. Turn the slicer off by pushing the stop
button. The power indicator light will go out. Always turn slice thickness dial clockwise until it stops to close
the slicer table.
7. Now you can unload and load food product from the food chute.
Operating Instructions