Product Brochure

Electronic Pump Controllers
PumpWave
™
The PumpWave™ series is a range of electronic pump controllers ideally suited for domestic water
supply in and around the home. PumpWave™ offers complete automatic management of most electric
pumps up to 1HP. Both the PumpWave Plus™ and PumpWave 2™ offer efficient pump management,
protect against pump dry running, and eliminate frequent small draw-off pump starts due to leaks and
low flow pumping applications. It allows the pump to run continuously when water demand is over
0.5 GPM and eliminates the pressure variation typically seen with traditional pressure switch systems.
Unlike other electronic pump controllers, the PumpWave Plus™ incorporates a small pressure tank
which allows it to prevent short cycling of pumps, thereby extending pump life and saving energy. The
process is simple. The PumpWave™ device draws water from the pressure tank until the adjustable
start or cut-in pressure is achieved, at which point the pump is switched on and allowed to run until
there is no longer any flow within the system.
Features
• Eliminates Frequent Small Draw o Pump Starts
• Assures Constant Flow
• Protects Against Pump Dry Run
• Starting Pressure Adjustable from 14.5 to 36.3
PSI | 1 to 2.5 Bar
• LED Status Indicators: Power On, Pump On/O,
and Dry Run Control
• Can Reduce the Need for Larger Tank
PumpWave
2
™
Integrated
pressure gauge
Reset button
LED status
indicator
PumpWave
Plus
™
Gasket sealed
cable inlets
Integrated 0.79 gal (3L)
pressure tank
1" BSPP connections
PumpWave 2
™
For those looking for a customizable system, look no further.
The PumpWave 2
™
is a standalone pump controller that can
be installed in combination with a range of inline and horizontal
tanks.
PumpWave Plus
™
PumpWave Plus
™
is a compact solution that
combines a pump controller with an integrated 0.79
gallon (3L) pressure tank. It is ideal for applications
where space is limited. The PumpWave Plus
™
is
easy to install as you simply connect it to the pump
and the system is ready to go. The PumpWave
Plus
™
assures a constant flow and provides
guaranteed pump dry run protection. Contact a
sales representative for more information.
• All-in-one compact system
• Comes with integrated 0.79
gallon (3L) pressure tank
Horizontal
PWN-US-20LH
PWN-US-24LH
PWN-US-60LH
PWN-US-80LH
PWN-US-100LH
Inline
PWN-US-8LX
9 10
Specications
PWP-110B & PWS-110B PWP-220B & PWS-220B
Supply Voltage
110 V AC 220-240 V AC
Frequency
60 Hz 50/60 Hz
Maximum operating power
0.74 kW (1hp) 10(8)A 1.47 kW (2hp) 10(8)A
Connection
1” BSPP (compatible with NPT)
Protection level
IP 55
Maximum pressure
116 psi | 8 bar
Maximum ow rate
26.4 gal/min | 100 L/min
Minimum ow rate
0.4 gal/min | 1.5 L/min
Maximum water temperature
95ºF | 35ºC
Ambient temperature
32-104ºF | 0-40ºC
Factory reset cut-in pressure
29 psi | 2 bar