Product Brochure

High Volume

PressureWave SF

™

GWS USA’s PressureWave SF tanks are perfectly suited for application where higher volumes of water

storage are required. These include well systems, irrigation systems, and water hammer arresting in

residential and light commercial applications. PressureWave SF™ series range from 53-119 gallons with a

maximum working pressure of 150 psi.

PressureWave SF™ tanks feature an intricate, NSF-listed interchangeable membrane, providing a

contaminant- and corrosion-free water storage chamber that allows for replacement if required. The unique

membrane design along with its innovative anchored installation prevent the membrane from collapsing and

deforming, providing maximum life, durability, and performance versus standard bladder designs. Water

enters the membrane through a stainless steel water connection, supporting the prevention of contaminants

and corrosion in the water storage chamber.

PressureWave SF™ tank’s brass air valve is exceptionally durable, withstanding high pressures, high

temperatures, and resisting corrosion. All internal parts, including the air valve, are rounded to prevent

piercing of the membrane in extreme conditions. To provide enhanced exterior protection from UV ray and

salt spray damage, our almond-colored exterior is a two-part powder-coated polyurethane paint.

PressureWave SF™ series high-volume pressure tanks are rigorously quality tested at several stages during

the manufacturing process to ensure structural integrity and performance. These vessels represent the

best value for the investment and, with scheduled pre-charge checks*, are designed to serve your needs for

years to come!

*A pre-charge check every six (6) months is recommended for the PressureWave SFTM tanks

Features

• ISO: 9001 Approved

• NSF-Listed Butyl Membrane

• Pressure Rating 150 PSI | 10 Bar

• Operating Temperature Range 14-194ºF

• 53-119 Gallon for Sizes Not Covered by PressureWave

™

• Suitable for High-Volume Applications

• Comprehensive Testing on All Tanks

• Contaminant-Free Water Chamber

• Stainless Steel Water Connection

• Leak-Resistant Air Valve

• Durable Rust-Resistant Exterior

Air Valve

Lifting Lugs

Stainless Steel Water Connection

Polyurethane Paint Finish

Note: Minor dimensional variation may occur. Maximum working pressure: 150 psi | 10 bar. Operating temperature:

14-194ºF | -10-90ºC. Tank pre-charge: 38 psi | 2.6 bar. Interchangeable membranes - contact a sales representative for

more information.

7 8