Operation Manual

AFTER SALES SUPPORT
USA
Storage
21
USA
1-866-558-8096
[e-mail]
2. Disconnect the power supply unit
14
from the power supply.
3. Disconnect the drive unit from the power supply unit by removing the con-
nector cable
15
from the connector jack
13
.
4. Let the manicure/pedicure set cool off completely.
5. Before cleaning, remove the respective attachment
6
,
7
,
8
,
9
,
10
,
11
or
12
from the drive unit.
6. Wipe the drive unit, the power supply unit and the storage bag
16
off with
a damp cloth.
7. Tap the sapphire discs
6
and
7
to remove the abrasive dust from the
holder.
8. Clean the attachments
6
,
7
,
8
,
9
,
10
,
11
and
12
with a suitable
paintbrush, a suitable soft brush or a dry cloth.
9. Let all parts dry completely before placing them in the storage bag.
Storage
− We recommend you use the storage bag
16
for storage.
− Store the manicure/pedicure set in a dry and well-tempered location with
an ambient temperature between 0°C and a maximum of 40°C.
Troubleshooting
Fault Possible cause Solution
The drive
unit doesn’t
work.
The plug of the power supply
unit is not correctly connect-
ed with the socket.
Connect the plug of the pow-
er supply unit to a socket as
prescribed.
The power supply unit’s con-
nector cable is not connected
with the drive unit.
Connect the power supply
unit’s connector cable with the
designated plug to the con-
nector jack of the drive unit.