Operation Manual

59
Assembling the Ice Cream Maker
Hazard! Switch the appliance off and disconnect the mains plug prior
to all assembly activities.
1. Place the motor block (1) on the lid (2) in the designated xing. You
will hear a “click” sound when the motor block (1) is in the right
position.
2. Insert the connector (5) into the motor block (1) from below.
3. Now, you can slide the stirring paddle (4) onto the connector (5).
Ensure that the stirring paddle (4) locks in, so that a proper t is
guaranteed.
Warning: Only touch the frozen freezer bowl (3) with pot holders
or oven gloves, in order to avoid frostbite.
4. Only remove the freezer bowl (3) from the freezer directly prior to
preparing ice cream.
Important: Do not pour in the ice cream mass yet!
5. Place the list (2) with the motor block (1) on the freezer bowl (3).
Turn the lid (2) slightly clockwise, as far as it goes.
Switching on the Ice Cream Maker
Important: Do not pour in the ice cream mass yet!
• Press the on/off switch (6) to switch on the Ice Cream Maker. The
stirring paddle (4) will begin to rotate.
GB