User's Manual

HUDGPS
User Manual
Rev.A00
8
GlobalTop Technology Inc.
16 Nan-ke 9
th
Rd Science-based Industrial Park, Tainan 741, Taiwan, R.O.C.
Tel:[phone] Fax:[phone] http://www.gtop-tech.com
email:[e-mail]
© Copyright 2006 GlobalTop Inc.
1.4 Quick Hardware Installation
A. Paste the heat insulation film
1. Please find the most suitable position of the heat insulation film on the windshield
window to get the best projecting angle. It is recommended to put the heat
insulation film on the left under corner of the windshield window.
2. Remove the backside film of the heat insulation film and apply to the choosing
position on last step. Gently smoothing this film onto windshield to avoid bubbling
generated.(Note: regular process will be recommended to apply one thin layer of
soap mixed water on the side which to stick onto windshield and get rid of bubble)
3. Paste the heat insulation film on the windshield window and adjust the position to
the suitable place.
4. Use the smooth slab to remove the bubbles of the heat insulation film.
5. Remove the surplus soap water.
B. Fix the HG-100
1. Remove the backside film of the rubber film and stick it on the iron plate.
2. Put the iron plate below the heat insulation film. Check the image of the iron plate
is projected to the area of the heat insulation film.
3. Put HG-100 on the iron plate and check the projecting area is in the heat insulation
film to get the most comfortable view angle.
4. Remove the other backside film of the rubber film and stick it.
C. Starting the HG-100