User's Manual

Bluetooth GPS Receiver User Manual
-6-
4. Start to Use
Step 1：Charge the battery in first use
Please fully-charge the battery with at least 4 hours before you use the GPS receiver firstly.
Connect charge cable to the power plug at the
bottom and start charging
Power Indicator：
(1)Green LED blinking
àPower low/charging (see below detail described)
Bluetooth
indicator
Power switch
GPS indicator
(2) Green LED stop to blink &light up
àCharge completed (LED will vanish when cable away)
Step 2：Power on, connect with Bluetooth
Push the power switch 1~2 seconds to Power
on
Bluetooth indicator：
(1) Bluetooth host searching：
à3 pulses per second
(2) Bluetooth host connected：
à1 pulse per second
Bluetooth indicator
Power ON/OFF switch
Note: Some PDA needs to restart the Bluetooth function if you need to re-connect.
Step 3
：
GPS function test
In firstly Use of this Receiver,we strongly recommend to bring your Bluetooth GPS Receiver
outdoor and open sky at least 10~15 minutes for almanac update.
Power on the G33 Bluetooth
GPS Receiver
GPS Acquisition Fix Indicator
(1) Red LED lights up continuously
：Inquiring
GPS Acquisition
(2)Red LED blinks (1 pulse/3sec)：Position
fixed