User Manual

GTCAM Quick Start Guide

page 4 of 8

Step 4: Locate Network

GTCAM provides you two types of connection: Wi-Fi or Ethernet but only one at a time.

※ Connect to network via Wi-Fi

 Check on and press “Next” button.

 Click “Search” to find out all available wireless connection.

 Select the Wi-Fi AP name you want to connect then click “Next”.

 Input the password then click “Check“ to verify. Click “Ok” when you see “Connection ok”.

 Click “OK”, you will see message “Basic configuration is finished, now you should click “Reboot” button to reboot the

system. Enjoy your GTCAM!”, click “Reboot” to restart the system.

 If you see message “Device successfully rebooted, you can click “OK” to quit!” after rebooting, click “Ok” to quit this

setup program, you may start to use your GTCAM.

Step 1

Step 2

Step 3-(1)

Step 3-(2)