User's Manual


2. Login the Plug as ubuntu/marvell as follow
1.3 Using Kerboard,Mouse and VGA/HDMI display
With a network connection(WiFi or Ethernet cable), keyboard, mouse and
flat panel display (HDMI or VGA), the Display Plug can be used as a
standalone Linux machine, Follow these steps to boot the Display Plug
and use the Linux destop.
1. Plug in a USB mouse, USB keyboard and a flat panel display(HDMI or
VGA monitor) to appropriate port. Connect a Ethernet CAT5/6 cable to
a wired network if required
2. Turn on the monitor and then power on the Display Plug.
3. Waiting about 50seconds, the destop will show up as below: