User's Manual

MiraBoxUser Guide –page15 / 27


(4) Connect to WiFi AP
# iwconfig mlan0 essid<AP’s ID>
# dhclient mlan0
# ifconfig mlan0
#ping 192.168.1.1
The below screenshot is a example for how to connect a mlan device. If you can see IP address (for example:
192.168.1.102) means you have already connected and got an IP.
(5) Switch back to WiFi AP mode
There are two useful script files:
Client_ap.sh – switch from wifi client mode to wifi AP mode
Wlan.sh – switch from wifi AP mode to wifi client mode