User's Manual

MiraBoxUser Guide –page11 / 27


(4) Now you are the root user and have the full control of the mirabox
3. WiFi AP mode testing
MiraBoxServer has a built-in WiFi module which is in compliance with 802.11 b/g/n standard. The WiFican work
as client or AP modebut only one at a time. The default mode is AP modeevery time when it powers on, and the
indication light D6 is blinking blue.
Here are steps for testing:
(1) Enter command and you will see message for uap0 device.
#ifconfig
(2) Prepare one computer installed with Wi-Fi Lan card, here we use computer with Windows XP operating system
for example.
(3) Go to “Network Connections”as shown below..

1. Select “Local Area connection 4”