User's Manual

MiraBoxUser Guide –page10 / 27


2. Go into debugging console.
(1) Power on the MiraBoxand you will see messages on screen as below
(2) You can press any key to stop auto-boot when you see the bootdelay timer is counting down.
After entering the uboot prompt, you can also change the uboot environment variables such
asbootdelaytime, Ipaddr,serverip and so on.
(3) If no key was pressed to interrupt the uboot, it will continue running to the login screen where urges you to
input the login name and password, here is the default login information.
Login :root
Password: nosoup4u

