Training Gym Pro Instruction Manual Version 1.0 The instruction manual uses for version 1.2.9 or later.
Software Instruction Manual Table of Content 1. How To Install PC Software Application...................................................................... 3 1.1 Installing the USB driver ................................................................................................................... 3 1.2 Installing the Training Gym Pro......................................................................................................... 5 2. Running GS-Sport Training Gym Pro Application............
Software Instruction Manual 1. How To Install PC Software Application 1.1 Installing the USB driver For GH-625: The USB driver is required to recognize your device via USB when it is connected to your PC. 1. Insert the CD into the CD-ROM drive, and the Auto-run will begin. 2. Select the appropriated driver base on your system to install driver to your PC. 3. Follow the instructions to complete the installation.
Software Instruction Manual ¾ Step 3: The USB driver installation has been accomplished.
Software Instruction Manual To check Computer Management＞Device Manager, you may see the STM Virtual COM port has been detected. 1.2 Installing the Training Gym Pro z Install Framework v2.0 or above To check the Microsoft Framework version in your system go to: ’’Control Panel > Add/Remove Programs’’ Note: Originally, the Framework version in Windows XP SP2, SP3 and Vista or above should be version 2.0.
Software Instruction Manual ¾ Step 3 : Press ’’OK’’ ¾ Step 4 : Press ’’Install’’ ¾ Step 5: Installation process and press ‘‘close’’ to enter the Training Gym Pro application.
Software Instruction Manual ¾ Step 6 The software will execute and connect the database automatically. ¾ Step 7: Create a user account and select model.
Software Instruction Manual Note: Please base on your device type to select Model before use. ¾ Step 8 : The process bar will detect connection via the USB cable.
Software Instruction Manual 2. Running GS-Sport Training Gym Pro Application You can run the GS-Sport Training Gym Pro by double clicking on the " GS-Sport Training Gym Pro " short-cut icon from desktop. Or go to Start > All Programs > GlobalSat GS-Sport > GS-Sport Training Gym Pro. 3. PC Software Application Introduction 3.1 System Requirement For better performance, the following system requirements are recommended for GS-Sport Training Gym Pro: z CPU: Pentium III Processor or higher.
Software Instruction Manual z GS-Sport Training Gym Pro software Note: 1. You can create other user names to login and import backup database as well. 2.
Software Instruction Manual 3.3 Section Description of Training Gym Pro 3 1 5 4 2 6 No.
Software Instruction Manual Google Maps(satellite, terrain, hybrid) 5 Open Street Map (Cycle Maps) Maps Open Street Map (Mapnik Maps) Open Street Map (Osmarender Maps) 6 Training Records Information 3.4 Menu Structure of Training Gym Pro Import Activity Import training data Export Activity Export training data Capture Google Map Main Show on Google Map Capture current Google Map window as JPG or BMP format Show Training data on Google Map. Show Training data on Google Earth.
Software Instruction Manual Metric Unit Exchange Mile system Nautical English Chinese Language Spanish German Italian French Japanese Altitude Overlap Time base Speed Distance base Heart Rate Pace Help About GS-Sport GS-Sport introduction About US The team information 4. PC Software Application 4.1 Main Menu 4.1-1 Import Activity In GS-Sport Training Gym Pro, click [Main] > [Import Activity] You can import any serial of GSsport Training Gym to Training Gym Pro software z Select the .
Software Instruction Manual z The listed of loaded activity information showed on left bottom of column 4.1-2 Export Activity In GS-Sport Training Gym Pro, click [Main] > [Export Activity] z Choose a training file you want to save name it on note column. z To Save it.
Software Instruction Manual z Will pop a message to let you know the file name and file be saved. 4.1-3 Capture Google Map Capture current Google map window and save it as JPG format 4.1-4 Show on Google Map Show the trained information on Google map directly. 4.1-5 Show on Google Earth Show the training data on Google earth directly(please download google earth in advance) 4.1-6 Log Out You can log application out and change other username to login. 4.
Software Instruction Manual 4.2 File Menu 4.2-1 Open Choose the several kind of log file you want to load into Training Gym Pro software besides, it supports KML, GPX, CSV, NMEA, TXT format. 4.2-2 Save Choose the file from data base you want to save it. Right now it supports KML, GPX, CSV, NMEA, TXT format. 4.3 Search Menu 4.3-1 Search by date Check ‘’search by date ‘’ and select the period of date to get completely training information. 4.
Software Instruction Manual z The completely training information will still show on the left bottom of column.. 4.4 Planning Menu You can plan your waypoints or finding somewhere through Planning Menu.
Software Instruction Manual z Add the waypoint on Google map then name it (limitation 6 characters) and save it. And The map will show every waypoint you just added. 4.5 Data Transmission Menu 4.5-1 Track Point 4.5-1.
Software Instruction Manual z All list of training data will show.
Software Instruction Manual 4.5-1.2 Upload to device z You can click [Data Transmission] > [Track Point] > [Upload to device] to select your specific file to transfer to device.
Software Instruction Manual 4.5-1.3 Delete all from device z When you click [Data Transmission] > [Track Point] > [Delete all from device ] will pop a message to double confirm as are you sure you want to delete all Track Record from device. Click ’’Yes’’ z Start to delete all data from device z All Track Records deleted successfully from the device. 4.5-2 Waypoint 4.5-2.
Software Instruction Manual 4.5-2.2 Upload to device z You can click [Data Transmission] > [Waypoint] > [Upload to Device] to transfer waypoints from PC Software to device. z Select the waypoint you want to transmit to device.
Software Instruction Manual z Uploading waypoint completed successfully when finished. 4.5-2.3 Delete all from device z You can click [Data Transmission] > [Waypoint] > [Delete all from device ] to delete the all waypoints of device. 4.6 Configuration Menu 4.6-1 Com Port Setting You can scan COM port to build synchronization between device and computer.
Software Instruction Manual 4.6-2 Device Configuration z The application will retrieve device information and all configurations. And you also can configure them. You can save the configuration as a log file or direct to configure device. Note: There is something difference of configuration items base on different Model. 4.6-3 Firmware Upgrade You can update your firmware of device by using this item. z Click ’’Browse’’ to select the latest firmware file (*.ghd) to upgrade.
Software Instruction Manual z Press Update to get new firmware Step :2 z Are you sure you want to update device, you wil lose all device data , Press OK (If you need save old data of device, please save it before you update new firmware) 4.6-4 Unit Exchange There are three measurement units for selection.
Software Instruction Manual 4.6-5 Language There are English, Chinese, Spanish, German, Italian, French and Japanese languages for selection. Once you chose a language, the Training Gym Pro will change accordingly. 4.7 Overlay To get comparison with multiple records, you can use Overlay to get start. Click Overlay to active the control window and select data folder you interest to make comparison.
Software Instruction Manual 4.8 Help Menu 4.8-1 About GS-Sport You will see the version of Training Gym Pro. 4.8-2 About Us Will connect to GS-Sport website directly: www.gs-sport.com.tw 5. Map types There are two main popular webpage instant Map available in Training Gym Pro software. Google map and Open Street Map which includes Cycle map, Mapnik map, Osmarender Map: 5.
Software Instruction Manual 5.2 Satellite Map (Google Map) 5.3 Terrain Map (Open Street Map) 5.
Software Instruction Manual 5.5 Cycle Map (Open Street Map) 5.6 Mapnik Map (Open Street Map) 5.
Software Instruction Manual 6. Troubleshooting & FAQ 1. Why does it show “PC com port error” when I download data? Solution: (1). Please check if the USB driver is installed or not. (2). Please check the USB driver supports your system or not. (3). Connect to your PC with the USB cable. (4). Double click the “GS-Sport Training GYM Pro” icon from desktop to start the application. (5). From menu bar click “Configurations”, and click “Scan COM Port” button. COM port will be automatically scanned. 2.
