USB Connector Microphone Power Button External Antenna Connector Emergency Button LED Indicator TR-151 Quick Start Guide
LED Indicator A B C D A GSM LED LED Blink Quickly (Once per second) Blink Slowly (Once every 3 seconds) State 1.No SIM card inserted 2.TR-151 is searching GSM network 3.SIM card is registering to GSM network Standby Mode B GPS LED LED Keeps On Blink Slowly (Once every 3 seconds) State 1.TR-151 does not get GPS fix 2.TR-151 is trying to get GPS fix TR-151 gets GPS fix C Status LED LED Keeps On Blink State Battery low 1 time TR-151 is being turned off.
Device Operation Charge the device Before using TR-151 for the first time, please charge it by connecting to AC power adapter under the power-off condition at least 4 hours. You can also charge the TR-151 by connect it to PC or Notebook via USB cable. (The power of PC or of notebook should be turned on.) Note: The attached battery is specially designed for TR-151. Please do not use other type of battery; otherwise it will damage the device.
Install Battery Red Yellow Black Plug the battery connector into socket. Be aware that the red wire must be plugged on the top side. Please put the connector wire under the battery, and then put the battery into battery compartment. NOTE: After installing the battery, the status LED will emit red light. After the LED go out, please wait for 5 seconds before turning on the power. Please take out the battery if you do not use TR-151 for a long time. SIMPLE TRACKER TR-151 03.
Turn on/off TR-151 - You could turn on the device by pressing and holding the power button until you see status LED [ ! ] blink 2 times. - You could turn off the device by pressing and holding the power button until you see status LED [ ! ] blink 1 time. Emergency button - You could press emergency button until you see status LED [ ! ] blink 5 times. TR-151 will try to get GPS fix and then send out the emergency SMS to preset phone number. SIMPLE TRACKER TR-151 04.
