GPS Director Plus GD-102 User Manual Version 1.
CONTENT Chapter 1： ：Functions and Specifications....................................................... 3 1-1 Function and Features...............................................................................................3 1-2 Specifications ...........................................................................................................4 1-3 Accessories...............................................................................................................5 1-4 Appearance..............
Chapter 1： ：Functions and Specifications 1-1 Function and Features Can set 5 Destination Points Display directions with Digital Arrow Display (Can display 16 directions) Magnetic North Direction Indication; present coordinates display Manual Setting of Destination Coordinates Maximum Destination Distance Showing (0~999.
1-2 Specifications Electricity GPS chipset High sensitivity single chip solution Frequency L1, 1575.42 MHz C/A Code 1.023 MHz chip rate Channels 48 channel all-in-view tracking Sensitivity Tracking:-161dBm Display Pixel H*W Backlight Type Power Battery Type Operation Time Buttons Power/Backlight Button Selection/ Setting Button Appearance Dimension Weight Color 96x65 dot Matrix White AAA X 2 15 hours Short-click: Turn on backlight. Long-click: 1. Power off device under main screen. 2.
Antenna GPS antenna ACCURACY Patch Antenna 10 meters, 2D RMS 2 meters CEP Speed Accuracy 0.
1-4 Appearance Front view and Back view 1 Display 2 Battery Cover 3 Power/Backlight Button 4 Selection/ Setting Button Shows the GPS fix status, power level, destination direction and distance Unlock the both of lock and lift the cover from bottom side Short-click (1sec): Turn on backlight. Long-click (2sec): 1. Power off device under main screen. 2. Return to last page under each setting screen. Short-click (1sec): To select. Long-click (2sec): To set.
Chapter 2： ：Start to Use 2-1 Install AAA Battery into the device Unlock the battery lock Take the cover off Put the battery in the correct direction Push in opposite side to Lock 2-2 Magnetic North Adjustment 1. 2. 3. When using GD-102 for the first time, GD-102 will automatically perform the magnetic-north adjustment as seen in the left screenshot. For the method of adjustment, please refer to Chapter 3-2.
Chapter 3： ：Using GD-102 3-1 Main Function Screen GD-102 has three main function screen，just press shortly the “PW/Backlight” key to change Direction Navigating, Moving Info, Accumulator Info sequentially。 The default screen is Direction Navigating。 Direction Navigating It shows the direction and distance of target place. Indication Description The GPS fix indication will keep ON when device gets a GPS fix. GPS fix indicator will flash when device does not have GPS fix.
Moving Information Screen It shows current time, moving speed, moving period and moving distance. Indication Description The GPS fix indication will keep ON when device gets a GPS fix. GPS fix indicator will flash when device does not have GPS fix. What is shown on upper right corner is the battery power level 75%~100% 50%~75% 25%~50% Battery Low.
Accumulator Information Screen Under this screen, it shows total average moving speed, total moving max speed, total moving period and total moving distance。 Indication Description The GPS fix indication will keep ON when device gets a GPS fix. GPS fix indicator will flash when device does not have GPS fix. What is shown on upper right corner is the battery power level 75%~100% 50%~75% 25%~50% Battery Low.
3-1-1 Automatic Setting the Destination Description 1. Under direction indication screen, click Selection/ Setting button to select and set the following 5 destination’s coordinates. 2. After GD-102 has GPS fix, long click Selection/ Setting button will save the present coordinates as the selected destination’s coordinates. While GD-102 is saving coordinates, GD-102 will display as seen in the screen shot to the left and then return to the direction indication screen.
3-2 Main Setting Screen In the direction indication screen, you could make GD-102 enter main screen by long clicking Power/Backlight Button and Selection/ Setting Button at the same time. Screen and Operation Explanation: Indication Function Operation Long click Selection/Setting button to enter setting screen。 Manual Set You could set the following items. Destination’s Coordinate Long click Selection/Setting button to enter setting screen. You could set the following items.
3-2-1 Manual Setting Destination’s Coordinate icon Explanation Set Home’s coordinates. The indication will be ON when the destination’s coordinates are set. Set Building’s coordinates. The indication will be ON when the destination’s coordinates are set. Set Car’s coordinates. The indication will be ON when the destination’s coordinates are set. Set Travel’s coordinates. The indication will be ON when the destination’s coordinates are set. Set My Favorite’s coordinates.
3-2-2 Function Setting Icon Explanation Set User’s Time Zone Select the unit of displayed distance, KM, mile, and nm. Set backlight timeout Set the automatic power-saving sleeping time for Setting Time Zone Explanation 1. You could set time zone in this screen. The value on the lower screen represents the GMT time. 2. Short click Selection/Setting button to select the time zone. 3. Long click Selection/Setting button to save the time zone. 4. Long click Power button to return to last screen.
Setting Backlight Timeout-time Explanation 1. Set the backlight timeout-time in this screen. The value in the lower screen is the backlight time-out time. The backlight will be on for the time-out time after you short click the power/backlight button. 2. Short click Selection/Setting button to select the backlight timeout. 3. Long click Selection/Setting button to save the backlight timeout 4. Long click Power button to return to last screen.
3-2-4 Setting Data Icon Explanation Display the present time of the set time zone. Set GD-102 to initialize the sequent display of Direction Navigating, Moving Accumulator Info functions. Info, Make GD-102 do cold start。 Delete the setting coordinate of destination in GD-102 Showing Date and Time Explanation 16 1. The displayed date and time is from satellite data. It is not user-defined. 2. 3. Long click Power button to return to last screen.
Sequent Screen Setup Explanation It starts to display main sequent screen list while idling10 sec and change the screen per 10 sec. After setup, the Flag this icon. will be shown beside Add Direction Navigating into sequent display list. After setup, the Flag beside this icon. will be shown Add Moving Info into sequent display list. After setup, the Flag icon.. will be shown beside this Add Accumulator Info into sequent display list. After setup, the Flag this icon.
3-3 DATA LOGGER and Route Navigating Explanation 1. In addition to Direction Navigating, it also has route navigating function. It shows out after 2. direction function. Route navigating function could only be set via PC setting. Each route has 250 points in max. After setting, GD-102 will follow the route to move forward in sequent. 3. Long press select/enter key to turn on/off the data logger function . 3-4 Adjusting E-Compass Explanation 1.
3-5 Turning Off GD-102 Explanation 1. In the direction navigation screen, long click power 2. button to turn off GD-102. GD-102 will be turned off 2 seconds after seeing this screen. 3-6 Bike Mount Installation Install on bike grip and put the suitable spacer or into the ring of Adjust as the fixed angle on the grip and use and to lock the grip. Assemble into ‘s mounts as the correct direction and then tight it well. Put GD-102 device into for the normal operation. .
Chapter 4： ：How to Use PC Utility 4-1 Software Program Function Upload Record： User can upload recorded data and save in PC. Export Format： (1) KML for Google Earth (2) GPX for Standard GPS Format (3) GSD (GD-102 PC Utility specific format) (4) CSV Hardware Setting: GD-102 Backlight setting, Standby time setting, Target Lat. / Long. Setting Storage Information： Location, Time, Date, Altitude, Speed.
2. Press “Next” to start the driver installation. 3. Select the “Accept” and then press “Next” after read the EULA. 4. Start to install driver in PC system.
5. After completing the driver installation, press” Finished” to exit the installation. 4-2-2 PC Utility Installation 1. Press “PC Utility” first to install USB driver in PC. 2. Read the license agreement first and then click “I agree”.
3. Select “Default Install” and Click “Next”. 4. Choose the installation path and click the “Install” to start the installation processing. 5. Complete the installation and then click “Close” to turn off the installation program.
4-2-3 User Manual Click “User Manual” to open the manual folder of CD. Note: Manuals are made as PDF format. If your PC did not install related software to review the document, please kindly Click “Install PDF Reader” to install the free software for PDF document. 4-2-4 Manual Installation of Hardware Driver 1. 2. 3. Put CD into CD-ROM Open files management system and enter the folder “Driver”. Double-click 「setup.exe」and follow the indication to install GD-102 driver program.
4-3 Start to Use PC Utility 4-3-1 Connect Device with Cable and PC 1. Open GD-102 battery cover and use the cable to connect the device and PC. Unlock the cover switch 2. 3. Insert the cable into connector Power on the device by long click power button. Click the “GPS DIRECTOR PLUS “path on desktop to start the PC Utility (Note: functions will be enabled after linking.
4. Click “Link” to set the comport or use “Auto Detect” to find the correct comport of device. Then click “OK” to execute the link. 5. While the link successes, 26 functions will be enabled as color icon.
4-3-2 UI Explanation Route Folder List: Through downloading data from GD-102/ load existing files of GSD to load the route and display related information in this column Route Information Column: It shows the detailed information of the selected route from left part which including “File Name”, “Start time”, “End time”, “Route time”, “Moving distance”, “ Average speed”, “Max. speed”, “Max height”, “Min. height” and “Height differential” information column.
4-3-3 Tool bar/Function bar Explanation File Open : Open file as *.gsb format. Save : Save and export out the data as *gsb/*kml/*gpx formats. Exit : Close PC Utility.
Device Disconnect disabled. : Disconnect GD-102. When disconnected, icon will be Clean track points : While connected, press the button to clear the route of GD-102 device. The confirmation window is as below. Download track points : Download the data logger from GD-102. Processing screen Clean GPS Information: Clear the time and the distance of the accumulating information page in GD-102. POI Setting: Manually enter the Latitude and Longitude of the five target points.
Device Setting : GD-102 Device Setup for backlight/auto-off/Unit/Logger interval in System/Log page.
Log page: Log Interval Time: 1/3/5/10/30/60 (Unit: second) Log Interval Distance: Disable/10/20/30/40/50 (Unit: meter) Serial Port Setting : Select the comport or click “Auto Detect” button to get the comport. Then click “OK” to link GD-102.
View Toolbars and Docking Windows 32 Standard: Enable/Disable Tool bar Route Tool Bar: Enable/Disable Route function Properties: Enable/Disable Route Information Column Track File List: Enable/Disable Route Folder List
Status Bar : Enable/Disable Status List Application Appearance Select screen style by user’s preference. Help About GPS Director Plus : Display the software version and release date 4-3-4 Download data/ Saving Data/ Open data on computer 1. Please follow the steps to link GD-102 and PC and then click log data.
After the download completes, it will show the route list in left column. 2. Click the preferred route in left and the detailed route information will be shown on right part as below. User can also switch the table flag to review the route mapping, speed table, and altitude table.
Speed table of selected route Altitude table of selected route 35
3. Click the save icon download. 4. Click the folder icon 36 to save/export the data as gsb/kml/gpx formats from GD-102 to open the exist file.
4-3-5 Set GD-102 Multi-points route navigating function 1. Click the flag of Route as the screen. It will switch to the setting screen.
2. Pull the map to your favorite region and use the zoom bar to zoom to the suitable scale for making the route. 3. Click 38 to start the route plan. .
4. Move the cursor on the map and click the left button of mouse to mark the starting point 5. . Pull the map by left key and click the right button for the next point of the route.
6. Repeat the “5” step to complete all points. The max number of points is 250 for a route. It will show the total distance of the route on the left window. 7. Connect GD-102 with PC and power on the device. (Note: Please confirm the connection correctly) Click to finish the route plan and upload to GD-102. 8.
9. 10.Click Complete the upload after 100% processing. to save the route file and then enter the file name.
11.Click load the route 42 to read the existed route file.
Chapter 5: Troubleshooting When GD-102 can not be turned on or does not work properly, Please check if the battery is installed correctly. It requires more time to get GPS fix while GD-102 is moving. Please keep 1. GD-102 stationary when powering on GD-102. This will shorten the time to get a GPS fix. Keep GD-102 away from excessive moisture and extreme temperatures. Do 2. not leave it in the closed vehicles or put it under direct sunlight for extended periods of time.
Appendix 1： ：World Time Zone Table Time Code Description Region Time Zone ACDT Australian Central Daylight Time Australia +10:30 ACST Australian Central Standard Time Australia + 9:30 ADT Atlantic Daylight Time North America - 3:00 AEDT Australian Eastern Daylight Time Australia + 11:00 AEST Australian Eastern Standard Time Australia + 10:00 AKDT Alaska Daylight Time North America - 8:00 AKST Alaska Standard Time North America - 9:00 AST Atlantic Standard Time North America
HAR Heure Avancée des Rocheuses North America - 6:00 HAST Hawaii-Aleutian Standard Time North America - 10:00 HAT Heure Avancée de Terre-Neuve North America -2:30 HAY Heure Avancée du Yukon North America - 8:00 HNA Heure Normale de l'Atlantique North America - 4:00 HNC Heure Normale du Centre North America - 6:00 HNE Heure Normale de l'Est North America - 5:00 HNP Heure Normale du Pacifique North America - 8:00 HNR Heure Normale des Rocheuses North America - 7:00 HNT Heu
Appendix 2： ：FCC Notices This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure requirements: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
