User Manual

You are now ready to make your first journey with your TomTom
RIDER.
Battery cable
The battery cable can optionally be used to power and charge your TomTom RIDER from
your motorcycle battery.
Note: If you are unsure about setting up the battery cable, consult your local
motorcycle garage.
Connect the battery cable connector to the power connector on the holder.
[BatteryCableExplain.jpg]
Connect the red battery cable to the switched positive 12 volt power supply on your
motorcycle and the black battery cable to the ground supply on your motorcycle. Make
sure that the battery cable is secured safely to your motorcycle. It must not hang from
the frame or interfere with the motorcycle in any way. Make sure that it is also not in
contact with any areas of the motorcycle that become hot and may melt the cable.