Manualshelf

User Manual

ManualsBrandsGlobalSat WorldCom ManualsAudio Equipment"TomTom" Bluetooth Motorcycle Headset Transceiver
12345678910
[mirrormount8.jpg]
[mirrormount9.jpg]
the Mirror Mount in place.
Note: If you have only the bolt holes for a wing mirror, use
one of the bolts provided to hold the Mirror Mount in place.
Select the diameter of the bolt according to the diameter of
the bolt hole.
4. Screw the Adhesive Mount to the Mirror Mount, using four of
the small screws included with the mounting kit.
5. Screw the Holder to the Adhesive Mount using four of the small
screws included with the mounting kit.
You can now place your TomTom RIDER in the Holder. See this
section: Placing your TomTom RIDER in the Holder
Adhesive Mount
[AdhesiveMount4.jpg]
[Adhesivemount1.jpg]
[AdhesiveMount2.jpg]
Use the Adhesive Mount if you are unable to use any of the other
mounts, or if you want to place your TomTom RIDER in a
position that is not possible using the other mounts.
Attach this mount only to a part of your motorcycle that is strong
enough to hold the mount, the Holder and your TomTom RIDER.
Note: It is very difficult to remove the Adhesive Mount.
Think carefully about where you want to attach the Adhesive
Mount. Clean the position you have chosen thoroughly and make
sure that you remove any grease or dirt.
To use this mount, follow these steps:
1. Attach the adhesive pad to the Adhesive Mount.
2. Press and hold the Adhesive Mount in the position you have
chosen.
3. Screw the Holder to the Adhesive Mount using four of the
small screws included with the mounting kit.
You can now place your TomTom RIDER in the Holder. See this
section: Placing your TomTom RIDER in the Holder
Placing your TomTom RIDER in the Holder
[riderin.jpg]
[riderinclose.jpg]
[RiderInHolder.jpg]
1. Open the Holder and place the bottom edge of your TomTom
RIDER into the Holder first.
Make sure that the two teeth on the bottom of the Holder meet
the two connections on your TomTom RIDER. If your TomTom
RIDER is not placed in the Holder correctly, it may fall out while
you are driving.
2. Push your TomTom RIDER firmly into place.
3. Close the Holder. Make sure that your TomTom RIDER is held
firmly in place.