User Manual

Mounting the TomTom RIDER on your
motorcycle
Where should I mount my TomTom RIDER?
When you choose where to mount your device, think about the following:
 The mounting options available
 The most comfortable position
Spend some time thinking about where to mount your TomTom RIDER on your
motorcycle. Not all mounts are suitable for all bikes. It should be in a position where you
can see it easily and where it does not block your vision.
Warning: The Adhesive Mount is very strong and it is very difficult to remove once it
has been attached to your motorcycle. Before attaching the Adhesive Mount to your
motorcycle, be sure that you have chosen the position where you finally want to
mount your TomTom RIDER.
Mounting your TomTom RIDER
There are four different mounts:
 Handlebar Mount
 Handlebar Adaptor
 Mirror Mount
 Adhesive Mount
The sections below describe how to use each mount. Make sure that you screw all parts
of the mounts together very tightly, otherwise the mount may move while you are
driving.
Handlebar Mount
[handlebarmount.jpg]
[Clampmount5.jpg]
[ScrewHolder.jpg]
[clampmount1.jpg]
The Handlebar Mount is attached directly onto the handlebars.
To use this mount, follow these steps:
1. Unscrew the Handlebar Mount using the Allen key.
2. Wrap the piece of rubber provided around the handlebars to
make the handlebars thick enough for the Handlebar Mount.
Cut the piece of rubber to adjust the thickness.
Note: The piece of rubber helps prevent vibration and
stops the Handlebar Mount from slipping while you are
driving.
3. Place the Handlebar Mount around the handlebars and over
the piece of rubber.
4. Screw the Handlebar mount together tightly using the Allen
key provided.
5. Screw the Holder to the Handlebar Mount using four of the
small screws included with the mounting kit.
If your TomTom RIDER is not in a comfortable position,
unscrew the Handlebar Mount slightly and adjust the angle