User Manual

Before you can use your Bluetooth headset module with the helmet headset, you must
charge the headset module using the home charger.
[HeadsetExplainNoHelm.jpg]
[HeadsetExplainUnder.jpg]
Connect the headset cable to the Bluetooth headset
module and then to the helmet headset or standard
headset.
Attach the Velcro pads provided to the inside of your
helmet. These hold the helmet headset in place.
To turn your Bluetooth headset module on, press and hold
the On/Off button until you see the blue indicator light.
To turn your Bluetooth headset module off, press and hold
the On/Off button until you see the red indicator light.
If you did not establish a Bluetooth connection between
your Bluetooth headset module and your TomTom RIDER
when you first turned your TomTom RIDER on, you can
establish the connection at any time. From the main
menu, tap Change Preferences. Tap the arrow twice to
open the third preferences menu. Tap Connect to
headset and follow the instructions to establish the
connection.
Taking care of your TomTom RIDER
It is important to take care of your TomTom RIDER and to clean it correctly.
 Use the screen cloth provided to wipe the screen of your TomTom RIDER; do not use
any liquid cleaners.
 Only open the compartment that contains the memory card slot when you are
indoors. Do not open the compartment when your TomTom RIDER is wet.
 When carrying your TomTom RIDER, always use the TomTom RIDER case provided.
 If your TomTom RIDER gets wet, dry it with a soft cloth.
 Do not open the casing of your TomTom RIDER under any circumstances.
 Do not use the memory card (SD card) with any device other than your TomTom
RIDER. Other devices may damage the memory card.