User Manual

Making your first journey
Planning a route with TomTom RIDER is very simple. To plan your first route, follow the
steps below.
1. Tap the screen to bring up the main menu:
[mainmenu.jpg]
2. Tap Navigate to…
3. Tap Address.
[navigateToMenu.jpg]
Now you have to specify where you want to go. This is done by selecting first the
town, then the street and then either the house number or the point where two
streets meet.
4. Start to type the name of the town where you want to go.
[navigateToTown.jpg]
After you have typed a few letters, the names of towns that match what you have
typed are shown. When your destination is shown in the list, tap the name of the
town to set the destination.
5. Start to type the name of the street.
[navigateToRoad.jpg]
As with the name of the town, the names of streets that match what you have typed
are shown. When your destination is shown in the list, tap the name of the street to
set the destination.
6. Now do one of the following:
 Enter the house number of your destination and then tap Done.
 To select a point where two streets meet, tap Crossing and select the name of
the street as in step 5.
[navigateToNumber.jpg]
7. The route is calculated by your TomTom RIDER.
[routePlanned.jpg]
8. Tap Done. Your TomTom RIDER will immediately start giving you instructions for
reaching your destination.
To guide you to your destination, TomTom RIDER will give you spoken instructions and
visual instructions on the screen.
You should plan your route before you start driving. It is not possible to plan the route in
this much detail once you start moving. While you are driving, only the driving menu is
displayed. For more information, see this chapter: Menus
Note: Before you can plan a route in this way, your TomTom RIDER must first locate
your current position.
Finding alternative routes