User's Manual

power facilities and other unsafe places.
Simple Maintenance: Please wipe the dust and dirt with soft cloth, and do not use any
cleaner or chemical agent to avoid damaging the machine. If the machine is wet, please
shut down immediately, remove the battery, dry it with a soft cloth, and place it in a dry
and cool place. Do not turn on the machine before it is dry. If there is any problem or
local malfunction, please send it to the vendor or the service department of our company
for treatment. Do not disassemble and repair it by yourself.
Simple troubleshooting:
Unable to start: Please check if the battery is valid and installed properly for proper
replacement and installation.
Poor reception:
1. Press the button to turn up the volume. Please confirm whether the reception is bad.
If yes, press the MON key to enhance the reception.
2. Check whether the battery is sufficient.
Our Global WT Industrial Co., Ltd. radio generators RF electromagnetic energy during transmit
mode.This radio is designed for and classified as“Occupational Use Only”,meaning it must be used only during the
course of employment by individuals aware of the hazards,and the ways To Minimize Such hazards.
This radio is NOT intended for use by the“General Population” in an uncontrolled environment. This
radio has been tested and complies with the FCC RF exposure limits for“Occupational Use Only”.
Inaddition, our Global WT Industrial Co., Ltd. radio complies with the following Standards and Guidelines with regard
to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:
---IEEE Std. 1528:2013 and KDB447498, Evaluating Compliance with FCC Guidelines for Human
Exposure to Radio Frequency Electromagnetic Fields.
---American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with
Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
---American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the