Data Sheet

29 cm
24 cm
29 cm 24 cm
F34P
DIN
4113
DIN EN
13814
(DIN 4112)
DIN V
4113-3
4 X 8 X
m kg / m cm kg cm kg cm kg cm kg cm
4 ,00 500,00 0,93 1350,00 1,00 911,00 1,15 667,00 1,17 500,00 1,12
5,00 399,00 1,82 1120,00 1,63 774,00 1,92 605,00 2,09 476,00 2,09
6,00 331,00 3,14 954,00 2,42 668,00 2,88 509,00 3,05 403,00 3,08
7,00 261,00 4,61 829,00 3,37 586,00 4,04 438,00 4,21 350,00 4,27
8,00 200,00 6,06 730,00 4,49 520,00 5,40 384,00 5,55 308,00 5,66
9,00 157,00 7,70 651,00 5,76 467,00 6,96 341,00 7,08 274,00 7,25
10 ,00 126,00 9,54 586,00 7,21 422,00 8,73 305,00 8,80 247,00 9,04
11 ,00 104,00 11,58 531,00 8,83 384,00 10,71 276,00 10,71 224,00 11,04
12 ,00 86,00 13,82 484,00 10,62 352,00 12,89 251,00 12,82 204,00 13,23
13 ,00 73,00 16,26 444,00 12,59 324,00 15,29 229,00 15,12 187,00 15,64
14 ,00 62,00 18,91 408,00 14,75 299,00 17,91 211,00 17,63 172,00 18,25
15 ,00 53,00 21,75 377,00 17,09 277,00 20,74 194,00 20,33 159,00 21,07
16 ,00 46,00 24,81 349,00 19,63 257,00 23,80 179,00 23,24 147,00 24,11
17,00 40,00 28,07 323,00 22,37 239,00 27,08 166,00 26,35 136,00 27,35
18 ,00 35,00 31,54 301,00 25,31 223,00 30,59 154,00 29,68 127,00 30,82
F34 P
Visit the oicial Global Truss website:
www.GlobalTruss.de
Become a fan on Facebook
facebook.com/GlobalTruss
Span Uniform distribution load Deflection Center point load Deflection point load in third-point Deflection point load in quarter-point Deflection point load in 1/5 Punkten Deflection
Technical changes and errors are reserved
The weight of the truss is considered in the load table.
DATA SHEET
TECHNICAL DATA
Pipe diameter main pipe: 50mm
Wall thickness: 3mm
Material: EN AW-6082 T6
Snake brace: 8,8mm
Conical connectors included in scope of delivery
INCLUSIVE LOAD TABLE
Global Truss represents the highest quality and reliability.
The Global Truss F34P is a 4-point truss system. This provides optimum
volume and carrying capacity for its construction size and a tube
diameter of only 50mm. This system is connected via a special conical
connector system, which is joined together to a complete form fit
by
means of a copper hammer, creating optimal traction.
The Global Truss F34P finds application in trade fairs and shops, as well
as in the event industry in general. It is also characterised by a
minimum transport volume and the special lightweight design.
The conical connectors are of course included in the scope of delivery -
special designs and powder coatings can be carried out at short notice.
Global Truss has the largest truss storage worldwide and is permanently
able to deliver all systems. Furthermore, Global Truss is the only truss
manufacturer with its own coupler and hook range tested by "TÜV" and
"DIN".
GLOBAL TRUSS F34P TRUSS SYSTEM