Data Sheet

29 cm 24 cm
F32
DIN
4113
DIN EN
13814
(DIN 4112)
DIN V
4113-3
2 X 4 X
Technical changes and errors are reserved
The weight of the truss is considered in the load table.
Compression chord held every 1.0m!
(*) values only valid if the load burdens the junction:
m kg / m cm kg cm kg cm
2,00 504,00 0,17 762,00 0,21 484,00 0,22
3,00 336,00 0,57 573,00 0,52 380,00 0,59
4,00 219,00 1,19 439,00 0,96 311,00 1,15
5,00 140,00 1,86 349,00 1,50 262,00 1,90
6,00 96,00 2,69 289,00 2,16 217,00 2,74
7,00 70,00 3,66 245,00 2,95 184,00 3,74
8,00 53,00 4,79 213,00 3,87 159,00 4,89
9,00 42,00 6,06 187,00 4,92 140,00 6,19
10,00 33,00 7,50 166,00 6,10 125,00 7,65
m kg / m cm kg cm kg cm
2,00 504,00 0,17 589,00 0,16 442,00 0,20
3,00 261,00 0,45 391,00 0,36 293,00 0,46
4,00 146,00 0,80 291,00 0,64 218,00 0,81
5,00 92,00 1,24 231,00 1,00 173,00 1,27
6,00 63,00 1,79 190,00 1,45 143,00 1,83
7,00 46,00 2,45 161,00 1,98 121,00 2,50
8,00 35,00 3,20 139,00 2,60 104,00 3,27
9,00 27,00 4,06 121,00 3,31 91,00 4,14
10,00 21,00 5,02 107,00 4,12 80,00 5,12
Span Uniform distribution load Deflection Center point load Deflection point load in third-point Deflection
GRID 1,0m
GRID 1,5m
F32
DATA SHEET
Global Truss represents the highest quality and reliability.
The Global Truss F32 is a 2-point truss system. This provides optimum
volume and carrying capacity for its construction size and a tube
diameter of only 50mm. This system is connected via a special conical
connector system, which is joined together to a complete form fit by
means of a copper hammer, creating optimal traction.
The Global Truss F32 finds application in trade fairs and shops, as well as
in the event industry in general. It is also characterised by a minimum
transport volume and the special lightweight design.
The conical connectors are of course included in the scope of delivery -
special designs and powder coatings can be carried
out at short notice.
Global Truss has the largest truss storage worldwide and is permanently
able to deliver all systems. Furthermore, Global Truss is the only truss
manufacturer with its own coupler and hook range tested by "TÜV" and
"DIN".
GLOBAL TRUSS F32 TRUSS SYSTEM
TECHNICAL DATA
Pipe diameter main pipe: 50mm
Wall thickness: 2mm
Material: EN AW-6082 T6
Snake brace: 8,8mm
Conical connectors included in scope of delivery
INCLUSIVE LOAD TABLE
Visit the oicial Global Truss website:
www.GlobalTruss.de
Become a fan on Facebook
facebook.com/GlobalTruss
TCERROCNI
TCERROC