Structural Report / Statische Berechnung F32
Büro für Tragwerksplanung und Ingenieurbau
vom Felde + Keppler
GmbH & Co. KG
5
Lütticher Straße 10
-
12
52064 Aachen
Telefon
:
0241 / 70 96 96
Telefax: 0241 / 70 96 46
b u er o @ v o m - fe l d e . de
2) Aufhängung als Grid
Installation as grid
Die Druckgurte der Leitertraversen sind gegen Knicken auszusteifen. Dies kann durch
folgende Maßnahmen erfolgen:
The compression chords of the laddertrusses have to stiffened against buckling. This can be realised by the
following methods:
Alternativ kann die Aussteifung auch durch Verbindung mit einer bestehenden, ausreichend
steifen Konstruktion erfolgen!
Alternatively the stiffening can be realised by connection with an existant,
sufficiently stiff structure
Das Rastermaß a wird in der Berechnung mit 1,0m, 1,5m und 2,0m angesetzt.
Die zulässige Belastung wird in Abhängigkeit der Rastermaße angegeben.
In the calulaction the grid spacing the following grid-spacings a are taken into account: 1.0m, 1.5m and 2.0m.
The allowable loadings are specified in the tables (chapter 6) in dependency of the grid-spacing.