Safety Instructions

版本 修改内容修改人日期 备注
说明书
20221108
V00 20221108 张青青 新建文件
张青青
周海涛
余彩红
V00
-1-
-2-
-3-
-4-
-5-
-6-
1
3
2
30W Adapter
Boosta Stand
*Boosta Power Bank Sold Seperately
USB-C Cable
Package Contents
Power Bank Stand
1） Power the Boosta Stand
Warning
Specification
Notes:
Type-C Input DC 9V/3A; 12V/2A; 15V/2A
USB-A Output DC 5V/1A (5W)
Wireless Output 5W
Size
4.33 x 4.33 x 5.39 in.
Weight 7.83 oz
Wireless Distance
<6mm
Type-C Ouput (dock)
5V/3A,9V/2A
3） Charging Airpods or Qi-enabled Earbuds
2） Charge the Boosta Power Bank
· Connect the included cable and power adapter to the
USB-C port on the back of the Boosta Stand.
· Place your Airpods or other Qi-enabled Earbuds on the
small circular base of the stand.
The white LEDs with turn on for 2 seconds, when plugged
into power.
The LED will turn off automically when no device is
charging.
Please read all instructions and warnings before using
this product. Failure to read and follow the safety
instructions may lead to fire, explosion, electric shock
or other hazards, resulting in serious and / or fatal injury
and / or property damage.
Do not put this product in a fire or other environment
with high temperature, including the heat generated by
strong sunlight.
Keep away from high voltage devices.
Do not alter, disassemble, open, drop, impact, puncture or
crush this product.
Do not expose this product to rain or water.
The ambient temperature shall be maintained at 0-45 ℃
This product is not a toy. Keep away from children.
Ensure that all personnel using this product read and follow
these warnings and instructions.
This product has passed the quality inspection. If you find
that your product or battery is overheating, emits odor,
deformed, scratched or any abnormal phenomenon, please
stop using the Stand immediately.
When on Standby, the LED light will turn off.
When Airpods are charging on the base, the LED light will
stay on even when the device is fully charged.
If the temperature becomes too warm, the current will
decrease and the LED light will turn off. When the
temperature decreases, the LED light will turn on again
and charging will resume.
The LED will flash when a foreign object is detected on
the base.
Insert and remove the power bank gently in order to not
damage the stand or USB-C port.
Only use the 30W adapter included with the Boosta Stand.
· The LED at the front of the base will light up once
wireless charging has begun.
· Plug your USB-A cable to charge any device like a
Smartwatch, Headset, etc...
· Once connected the LED light will turn on for 2 seconds
and then the light will turn off.
· A. Slide the Boosta Power Bank in the opening from the
top of the stand, push the power bank all the way down
until the USB port is plugged into Boosta.
· B. The LED on the Boosta dock indicates the Boosta is
powered on and ready for wireless charging.
· C. Place your magnetic/MagSafe phone on Boosta to
charge both devices the same time.
5-IN-1 CHARGING STAND
4） Charging via Side USB Port
Do not place any foreign objects or any non-wireless
deviceson the wireless charger, it may product heat and
cause damage.
A.
B.
Boosta Dock
Type-C
Output Port
Button
Airpods Charging
LED indicator
Airpods Charging Area
Power Bank
LED indicator
Charging
USB-A Output Port
Type-C
Input Port
C.
The devices comply with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio /TV technician for help.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC
COMPATIBITLITY
Hereby, RapidX declares that the devices RX-BOSSTDBK, complies with Part 15
of the FCC rules.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
between 20cm the radiator your body.
FCC Warning
1 year limited warranty
Contact [e-mail]
07/22
说明书WCM13-70x110mm-80g书写纸-风琴折页-正反面印刷-4C
Boosta Wireless
Charging Stand
2022.08.03
研发部
林棣元