Specifications

2 Ver1.0
1. Bluetooth Transmission
2. Lithium Power Supply
3. 10 Buttons
二、Specification
1. Appearance And Parameters：
Operating Voltage 3.7V ~ 4.2V
Operating Current Working: less than 10mA; standby: less than 10uA
Operating Frequency 2402 ~ 2480MHz
Transmission Mode Bluetooth 4.0 BLE
Sensor None
Buttons 10 Buttons
Remote control distance 10 meters
Battery 400mAh 3.7V Lithium Polymer
Standby Power Standby：less than 20uA
Compatibility Compatible With Bluetooth 2.0，3.0，4.0，5.0
Material Plastic
Exterior Color Customized
Size 120mm*40mm*16.5mm
Weight About 39g
Charging Voltage 5V
Charge Current 200MA
USB Micro USB
Low-voltage Alarm 3.3V
Indicator Light A red light, a blue light
ON/OFF Switch One
Dormant current：16~20uA
Working current：1.0~1.5mA
2. Operational Instruction
1
） Bluetooth pairing
Turn on the ON/OFF switch, press the POWER button and the OK button for 3 seconds at the same time.
When the blue LED flashes quickly, it begins to pair. At this time, the host starts the search scan and makes
a connection, and the blue LED stops blinking and stays on.,the pairing is successful. After connecting,
press the POWER button to turn off.
2
） LED indicator
Red light： Low voltage (3.3V): the red LED flashes. Charging: the red LED is on. Fully charged: the red
LED is off.
Blue light：Wireless status：Fast flashing when pairing, always bright after successful connection
3
） Dormant time
a) Unpaired state: no operation in 30 seconds;
b) Search state: no operation in 150 seconds;
c) Connection state: no operation in 1800 seconds.
4
） Activation
When Bluetooth is in dormancy in connection state, pressing any key to activate the Bluetooth, and the
activation time is about 100-200 milliseconds.