TITAN4000 LTE Outdoor CPE Quick User Guide V1.
PLEASE READ THESE SAFETY PRECAUTIONS! FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules.
1. Overview The TITAN4000 is highly innovative and patented LTE outdoor CPE product designed to enable quick and easy LTE fixed data service deployment for residential and SOHO customers. It provides high speed LAN services to end users who need both bandwidth and multi-media data service in enterprise or home. It can also be used to support wireless fall back service. 1.1.
2. Getting Started 2.1. Packing list and CPE Unit Upon receiving the product, please unpack the product package carefully. Each product is shipped with the following items: Table 2-1 Packing List Products Quantity CPE Unit 1 Clamp 2 Mounting brackets 1 PoE Adapter 1 Power cord 1.5M 1 Quick user guide 1 If you find any of the items missed, please contact your local distributor immediately. 2.2. Installing the Equipment Open the SIM card cover, insert the SIM card and connected the ETH cable.
Mounting Bracket Using clamps to fixed.
Device logic connection LED Display LED Function Description SYS System run indicator MOD WAN port status SIM SIM card indicator Light is on – SIM card state is ready, Blinking Green – SIM card is error. ETH LAN port status Solid Green – LAN port is up. Blinking Green –LAN port in working. Wi-Fi Wi-Fi indicator Light is on –Wi-Fi is on. RF (5LEDs) RF Signal Strength Solid green – Device is in normal operation. OFF – NO wireless network access.
3. Managing the CPE Device 3.1. WEB Login User can access the dongle management GUI using a Web browser from a local PC connected to device LAN port. The user should ensure that the connected PC have acquired IP address via DHCP from the device. After IP connectivity is established between the PC and window CPE device, the user may launch a Web browser and specify Http://192.168.0.1 in the address bar, the default home page will appear. Note the default password is “admin”. 3.2.
Security This page allows user to configure the security setting. Applications This menu allows user to configure the port forwarding rules for the CPE in router mode.
Maintenance This page allows user to update the device firmware version, rest the device to factory setting and reboot the device. 4. Troubleshooting Q1: My PC cannot connect to the CPE. Check the PoE adapter LED is on and your PC LAN port is working. Q2: My CPE networking is not working properly. Check and make sure you are within LTE coverage. Q3: Unable to connect internet while the device is already connected to LTE network.
