User Manual

To share a network connection with a PC:

1. Plug a Cat.-5 Ethernet cable into the PC port on the phone (marked by ).

2. Plug the other end of the Cat.-5 Ethernet cable into your computer’s Ethernet port.

• If a PC is connected to your network through a phone, any phone resets and

power or network interruptions will disrupt the PC’s connection to the network.

To insert a microSD card (optional):

1. Release the microSD card cover and swivel it out of the way.

2. Insert a microSD card (oriented as shown on the phone), pressing it down

with a ngernail until it clicks into place.

To mount the phone on the wall

1. Prepare the wall-mount screws. The deskset will t onto wall-mount screws

with centers 3 ¼ inches (8.2 cm) or 4 inches (10.2 cm) apart. Most standard

wall plates have screw centers 3 ¼ inches (8.2 cm) apart.

2. If the deskset stand is attached, detach the stand.

3. Put the corded handset aside. Use a coin to rotate the handset tab 180

degrees. The protruding edge holds the corded handset when the phone is

mounted on the wall.

Protruding edge

Handset tab

4. Plug one end of the Ethernet cable into the Ethernet port on the rear of the

deskset (marked by ).

5. If the deskset is not using power from a PoE-capable network router or

switch, connect a power adapter to the deskset power jack.

Deskset Installation

Installing the phone (continued)