User Manual

15
Deskset Installation
Connecting the phone
IMPORTANT INFORMATION
1. Use only a compatible VTech power adapter.
To get a replacement power adapter, visit our website at
businessphones.vtech.com, or call 1 [phone].
Note: An AC adaptor with Ferrite Core must be used with this equipment to
ensure compliance with the Class A FCC limits.
2. The power adapter is intended to be correctly oriented in a vertical or oor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
Router
Plug the other end of
the Ethernet cable into
the router connecting
to your console.
Route the Ethernet
cable and power cord
through these slots.
Plug one end of the Ethernet cable into
the Ethernet port at the back of the phone.
Plug the small end
of the phone power
adapter into the power
jack at the back of the
phone (if PoE cannot
be provided through
Ethernet cable).
Plug the large end
of the phone power
adapter into an
electrical outlet not
controlled by a wall
switch (if PoE cannot
be provided through
Ethernet cable).