User Manual

23
Locating the Handset
You can nd handsets by paging them from the base. Press the HANDSET
LOCATOR (page) button on the base station to ring all handsets:
VSP600
6,/(1&( 6723
3DJLQJ
â
All handsets within range of the base will ring for one minute, even if the
volume is off.
To end the locator page, press
STOP
or place the handset in its charger.
To silence the locator page on one handset only, press
SILENCE
.
Screen icons
The following screen icons indicate your phone’s current status:
Icon Status
Indicates signal strength, from one bar (weak) to four bars (strong). Flashes
when out of range.
Indicates battery strength from 1/3 to 3/3. Flashes when empty.
The ringer is off.
Headset—audio is coming through a headset after the HEADSET key was
pressed.
Speakerphone—the speakerphone is active.
Microphone is muted.
Call Forward All is on.
Do Not Disturb is on.