User Manual

37
Conguring the Deskset
You can congure the deskset using one of two methods:
1. The Features and User settings menus on the deskset.
2. The WebUI, which you access using your Internet
browser.
This section describes settings you can change using the
menus on your deskset. For information about settings you
can change on the WebUI, see “WebUI” on page 43.
The system administrator can congure additional settings,
including Network settings, Provisioning, and the PIN code
by using the Admin settings menu. For more information
about this menu, see the VSP600/VSP601 Administrator and Provisioning
Manual, available at businessphones.vtech.com.
Setting Do Not Disturb
When Do Not Disturb (DND) is on for a line, calls to that line will be rejected.
To turn DND on or off:
1. Press MENU.
2. Press q to highlight Features and press SELECT.
3. With DND highlighted, press SELECT.
4. Press q or p to select which line DND should apply
to*, and press SELECT.
5. Press q or p to select On or Off.
6. Press SELECT to save.
* Note that DND will apply to all desksets and handsets assigned the line.
Setting call forwarding
Calls can be forwarded to another phone number always, only when busy, or
after a set number of rings.
To set call forward:
1. Press MENU.
2. Press q to highlight Features and press SELECT.
3. Press q to highlight Call forwarding and press SELECT.
4. Press q or p to select which line Call forward should apply to*, and then
press SELECT.
5. Press q to highlight the desired option:
• Always
• Busy
• No answer