Manualshelf

User Manual

ManualsBrandsGlobal Teck Worldwide ManualsCordless TelephonesVtech VSP600 and VSP608 | DECT Base, Up to 6 SIP Accounts | Cordless Office Desk Phone | with Microfiber Cleaning Cloth | #VTECH-VSP600-608-B (DECT Base with 1 handset)
21222324252627282930
24
Registering the deskset to the base
The deskset must be registered to the base station in order to make and receive
calls.
To register the deskset:
1. Make sure both the deskset and the base station is
connected to power.
2. On the base station, press the HANDSET LOCATOR
button for at least four seconds, then release the button.
Both LEDs on the base station begin to ash slowly.
3. Press the # key on the deskset to begin registration. The
process takes up to 10 seconds to complete.
When the rst deskset registers, it beeps and the screen
displays HANDSET 1.
If the deskset fails to register, it displays Registration failed. Try again. Wait for
a few seconds and repeat the registration procedure.