User Manual

41
5. Press
Add
.
A blank speed dial entry appears.
6. Use the dial pad keys to enter the name and number.
• Press
123
to switch between entering numbers, lower-case letters, and
upper-case letters.
• When you start entering characters, the
Cancel
soft key changes to
Backspc
. Press
Backspc
to delete incorrect characters.
• After completing a line, press q to move to the next line.
7. Press q and then press t or u to select the line you want to use for this speed
dial entry.
8. When you have entered the desired information, press
Save
.
Sending a Multicast Page
Your phone supports multicast paging. You can send a page to a paging zone that
has been set up by your system administrator. An incoming page may interrupt any
active calls you are on, depending on how your system administrator has congured
the paging function.
To send a multicast page:
1. When the phone is idle, press Menu.
2. With Features highlighted, press SELECT.
3. Press q to highlight Multicast Paging, and then press SELECT.
4. On the Multicast Paging menu, press q to highlight the desired paging zone.
5. Press SELECT.
You will hear a paging tone before you can begin broadcasting your message to
the assigned paging zone.
6. Press
End
to terminate the page.
Phone Features