User Manual

33
Note: The VCS752 can use only the rst two Bluetooth devices on the Device list for
calls (as shown by the Device 1 and Device 2 soft keys on the Idle screen. See page
11 for information about the Idle screen). For example, if you highlight Device 3
on the Device list and then press
Connect
, the VCS752 will move that device up the
Device list to make it available for calls. The device that occupied the Device 1 or
Device 2 positions will move down the Device list.
To delete a device from the Device list:
1. On the Device list, highlight the device you want to delete.
2. Press
Delete
.
The message Remove [device] from device list? appears.
Note: The device must be disconnected before the
Delete
soft key appears.
3. Press
Yes
.
The message Device removed appears. If you want to use this device with the
VCS752 in the future, use the Add device menu to add it.
To rename a device on the Device list:
1. On the Device list, highlight the device you want to rename. This name will
appear on the Device list and on the soft key on the Idle screen used to activate
the device. Names between 1 and 8 characters will best t the space available
on the soft key.
2. Press t or u to display the
Rename
soft key, and then press
Rename
.
The renaming screen appears.
3. Use the dial pad keys to edit the device name.
• Press
ABC
to switch between entering upper-case letters, lower-case
letters, and numbers.
• Press
Backspc
to delete characters.
4. Press
Save
.
To add a new cell phone:
1. From the Bluetooth menu, highlight Add device list and then press SELECT.
The Add device menu appears.
Phone Features