User Manual
Table Of Contents
- Important safety information
- Scope of delivery
- Product overview
- Setting up and connecting the base station
- Individually adjusting the headset
- Configuring the headset system
- Making calls using the headset
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs
- Specifications
Configuring the headset system
D 10 series | 16
Configuring the headset system
Adjusting the headset system using the DIP switches
왘 Use a pointed object (e.g. a ball pen) to set the DIP switches to the
desired position.
Configuring the handset lifter/hook switch –
DIP switches 1 and 2
Adjusting the ring tones of the base station – DIP switches 1 and 2
2
Switch position Function
Manual operation
Lifts/hangs up the handset manually or using
the handset lifter (Sennheiser HSL 10 II).
Electronic hook switch (DHSG standard)
Call control via the headset system.
For faster link establishment, see Fast Link.
Electronic hook switch (MSH standard)
Call control via the headset system.
Fast Link for DHSG standard and
HSL 10 II handset lifter
Recommended for frequent callers. Shorter battery
life. Fast link establishment without delay due to
hidden link to the base station.
Switch position Function
Ring tone is off.
Ring tone 1 is activated.
Ring tone 2 is activated.
Ring tone 3 is activated.