User Guide
Table Of Contents
- Package contents
- Product overview
- Connecting the base station
- Connecting the base station to the mains power supply
- Pairing and charging the headset before first use
- Connecting the base station to a fixed line phone – SDW 5 BS only
- Connecting the base station to a computer
- Connecting the base station to Bluetooth devices – BTD 800 USB only
- Reconnecting/disconnecting Bluetooth
- Connecting an optional USB headset or speakerphone
- Connecting an optional busy light
- Assembling and wearing the headset SDW 10 HS
- Adjusting and wearing the headset SDW 30 HS | SDW 60 HS
- Labeling the headset
- Configuring the headset system
- Setting up and using the headset
- Making calls using the headset system
- Preparing calls - initial settings
- Selecting audio source – fixed line phone/ computer/ mobile phone
- Making a call
- Accepting/rejecting a call
- Transferring calls to connected devices
- Ending a call
- Redialing
- Putting a single active call on hold
- Managing multiple calls - two calls from two audio sources
- Setting up conference call
- Using the dictation mode
- Listening to music using the headset
- Using the motion sensor
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs ...
- Specifications
SDW 5000 series headset system
CHARGING THE HEADSET AND STORING THE HEADSET SYSTEM46
Charging the headset and storing the headset system
Charging the headset
Always place the headset at the base station to ensure that it is fully charged when needed.
Shortly before the rechargeable battery is about to run flat (15 minutes remaining) the voice prompt “recharge
headset“ is announced in the headset.
If the headset has not been used for 12 hours, it will switch off in order to conserve battery power. To switch it on
again, press the headset’s hook button. This feature can be disabled via HeadSetup™ Pro.
1
2
100%
Place the headset into the magnetic holder of the base
station. The headset battery status LEDs on the base
station indicate the charge status.
During charging the Headset LED lights up blue. The
LED switches off when the headset is fully charged.
SDW 10 HS SDW 30 HS SDW 60 HS
Charging overview SDW 10 HS
LED segment Required charging time Corresponds to a talk time of
Super Wideband Wideband Narrowband
approx. 10 minutes approx. 1 hour approx. 2 hours approx. 3 hours
approx. 20 minutes approx. 2 hours approx. 4 hours approx. 6 hours
approx. 40 minutes approx. 3 hours approx. 6 hours approx. 9 hours
approx. 60 minutes approx. 6 hours approx. 8 hours approx. 10 hours
Charging overview SDW 30 HS | SDW 60 HS
LED segment Required charging time Corresponds to a talk time of
Super Wideband Wideband Narrowband
approx. 10 minutes approx. 1 hour approx. 2 hours approx. 2 hours
approx. 20 minutes approx. 2 hours approx. 3 hours approx. 4 hours
approx. 40 minutes approx. 5 hours approx. 7 hours approx. 8 hours
approx. 90 minutes approx. 9 hours approx. 11 hours approx. 14 hours